RECYCLING UNITS WITH LATERAL SIDE BOXES

RECYCLING UNITS WITH LATERAL SIDE BOXES:

Unique premium class recycling units having 5 stages water and sludge separation able to reach cleanliness up to 50/100 microns. The units are very easy to be use and maintained for a daily continuous work. Cappellotto recycling units with lateral side boxes are combining high performances of U shape water tank system filtration with the flexibility of lateral side boxes system (minimizing the height of equipment). On every unit you have a wide spectrum and options and they are mountable on all kind of chassis with all commercial PTO available.

Tank:

  • Stainless steel AISI 304
  • Lateral side boxes having 10.000 lt capability for sludge up to 3.200 lt for water
    • Mountable on 3 axis chassis having WB 3.900 mm
    • Tipping tank
    • Rear cover hydraulically operated (with wedges system)
Vacuum system:
  • Mechanically driven
  • Tri lobe vacuum pump
  • Flow rate 3.000 m3/h with 93% vacuum
  • Upper suction reel with arm® having total maximum length of 6.5 mt
Water:
  • Mechanically driven pump
  • Flow and pressure: 333 lt @ 170 bar or 274 lt @ 200 bar
  • Front pump encasement for primary HP reel, vacuum pump and HP pump with winter pack up to -15°C
  • Primary HP hose reel 160 mt @ 1” with automatic roll in/out and hose guide placed on front encasement and coming out parallel with vacuum hose
  • Secondary HP hose reel 80 mt @ ½” with automatic roll in/out and hose guide placed on front encasement
Shelf and boxes:
  • Closed side boxes positioned below of water tank pneumatically operated
  • Clothes cabinet with heating system
Various:
  • Radio remote control
  • Tool boxes
  • Hot/cold washing hands
  • Heated valves
  • Heating system (Webasto or Ebershpaker) for clothes cabinet and pump encasement
 Options:
  • Possibility to have the debris tank in carbon steel or all recycling unit in stainless steel AISI 316 as well
  • Main debris tank having capability up to 12.300 lt for sludge and up to 5.700 lt for water
    • Front pump encasement for winter pack up to -30°C
    • ADR or ATEX certification
    • Transport suction reel on back lid with 50 mt @ 3” having roll in/out hydraulic
    • Foldable or swivel vacuum reel on back lid directly connected with tank up to 30 mt @ 4”
    • Possibility to have the secondary HP reel delivered on the back instead on the side when you have the winter pack -30°C
    • Supports for tolls
    • Transfer pumps
    • Weighting system
    • Ladder
    • Vacuum pump up to 4.500 m3/h