Combination between suction and jetting machine, for empting septic tanks, industrial cleaning with vacuum pump and HP jetting. Flexible units with a wide spectrum and options. Mountable on all kind of chassis with all commercial PTO available.


  • Stainless steel AISI 304
  • Cylindrical tank 14.000 lt (12.000 + 2.000)
  • Mountable on 3 axis chassis having WB 3.900 mm
  • Front water compartment and sludge on back
  • Tipping tank
  • Rear cover hydraulically operated (with wedges system)
Vacuum system:
  • Mechanically driven
  • Rotary vane pump
  • Flow rate 1.600 m3/h with 93% vacuum
  • Transport suction reel on back lid with 50 mt @ 3” having roll in/out hydraulic
  • Hydraulically driven pump
  • Flow and pressure: 104 lt @ 200 bar or 127 lt @ 160 bar
  • Side located on heated pump encasement
  • HP hose reel 80 mt  @ ½” with automatic roll in/out and hose guide placed on side box
Shelf and boxes:
  • Open in one side and closed on the other
  • Clothes cabinet with heating system
  • Esthetic fix pump encasement
  • Radio remote control
  • Tool boxes
  • Hot/cold washing hands
  • Heated valves
  • Heating system (Webasto or Ebershpaker) for clothes cabinet and pump encasement for winter pack up to -30°C
  • Possibility to have the tank in carbon steel or stainless steel AISI 316 as well
  • Cylindrical tank up to 17.000 lt
  • Lateral side boxes tank having capability up to 11.700 lt for sludge and up to 4.800 lt for water
  • ADR or ATEX certification
  • Foldable or swivel vacuum reel on back lid directly connected with tank up to 30 mt @ 4”
  • Upper suction reel directly connected with tank up to 45 mt @ 3”
  • Upper suction reel with arm® having total maximum length of 6.5 mt
  • Supports for tolls
  • Transfer pumps
  • Weighting system
  • Ladder and catwalk
  • CAP CONTROL (it lower the engine truck rpm to save the fuel consumption)
  • Vacuum pump up to 4.500 m3/h